Henan Mechanical and electrical equipment is specialized in producing bauxite rotary kiln. Recently, many customers have consulted online. Our company has more than 20 years of bauxite rotary kiln production experience, which is professional and reliable. Today, I'd like to explain the small skills of adjusting bauxite rotary kiln, hoping to help you:

  1. Viewed from the kiln side, when the rotary kiln cylinder rotates from top to bottom, it will move from the left cylinder to the right, or from the right cylinder to the right. In the adjustment operation of the tug, the process is complex and delicate. What we need to pay special attention to is that we should not adjust too much at one time, but also adjust it evenly, that is, we should not adjust only one tug in the rotary kiln, especially when there is no effect after adjusting one tug, we need to change the direction and adjust another tug with relatively heavy stress.

  2. In addition, in the rotary kiln, it is better not to move the flying tug at the big gear to avoid damage to its meshing state. In the process of adjustment, we need to pay attention to the clearance and oil film of the thrust plate at the tugboat shaft end and the bearing bush end all the time. We can't relax until the axial force is improved.

   the above is the kiln adjustment tips of bauxite rotary kiln relaxed by Henan electromechanical equipment. If you have any questions, please call Yulong 24-hour hotline: 0371-67420568.

key words：Small skills and large release of bauxite rotary kiln